Check out this site where it’ll show you a cool trick that actually TRIPLES your PC’s performance!
The Ultimate CPU Overclocking Guide!
Your not force to sit here and watch this so that being said, DUMB comments andor video responses will be REMOVED and USERS BLOCKED!!! So dont waste your breathe just to get some kind of attention on youtube QUAD BITCHES!!!
@chanaman12345 I’ve had a Q6600 G0 at 3.2 (400×8) with stock cooling @ ~1.33V 24/7 stable for the past 30 months. Will change cooler and go 3.6 but haven’t gotten around to it yet.
The 1.45 voltage is too much for that cpu unless you have a good cooling unit for the cpu you can run the q6600 at 3.0ghz with a voltage of 1.37 which is very stable i have tested it it is stable no crashes what so ever…
But thank you i like your video and has helped me alot so yea THANKS YOUR KOOL…
I just wanted to say thank you for taking the time to make this video.
I tried your values on all qdr’s ranging from 2.8 to 3.15ghz and the computer wouldn’t load windows. It never has been able to load into these speeds no matter what voltage I give it for some reason. When I used these same values on 3.2Ghz it loads and runs perfectly fine.
Thank you for the values and the tutorial, I encoded 5 videos in a row and the max temp for my Q6600 G0 was 58c.
Thank you
wich ram did u use did you have a stock cooler ?? more specification pls
Chanaman, you seem like a pretty cool dude thanks for posting this vid, I know my setup might seem ancient now but Im still running a QX6700 with a 680i Ultra EVGA and a 8800GTX Im about to try your settings from here if you have a new tips since its been so long since you first posted this please message me, I want to squeeze as much as I can out of this rig without going to Water.
@gippula depends on your mobo, sometimes mobo reports the wrong temps or you program reports the wrong thing…….just try using other programs (never use Speedfan) CoreTemp is the best one i have ever seen. or check bios.
i have q6600 idle 46C and load 65C i use noctua uh n12p cooler. 9×400 1.28 vcore.
if you guys have any suggestion how to get the temps lower, please send me some tips. THANKS!!! cpu is not lapped and im not planning to.
thank you! helped alot!!!
OMFG 3:53 GD JOKE UR ON A ROLL
3:10 OMFG GD JOKE
do they still sell these? if so, where can i find one? thanks for all the guides and reviews
do they still sell these? if so, where can i find one? thanks for all the guides and reviews
The volts are discouraging to say the least. Already have to use crazy high volts on my vintage e6400 just to get past 3.5ghz on my 780i.
The volts are discouraging to say the least. Already have to use crazy high volts on my vintage e6400 just to get past 3.5ghz on my 780i.
I’ve taken my q6600GO up to 3.6ghz got pretty damn hot, now I’m on Q9650 stock
I’ve taken my q6600GO up to 3.6ghz got pretty damn hot, now I’m on Q9650 stock
you have klicked alt and del in the bios or you have burned bios on your cd?
you have klicked alt and del in the bios or you have burned bios on your cd?
You mentioned wanting to reduce boot time. Unfortunately even you had your CPU clocked at 5GHZ your computer wouldn’t boot much faster if at all. I’m sure you know that boot time is almost totally dependent on the HDD. Unless you could overclock your hard drive you won’t boot faster, SSD’s though will boot much faster. I have a 64gb SSD and I boot windows in under 20 seconds from power on to all my startup programs up and my system ready to go.
Alex.
You mentioned wanting to reduce boot time. Unfortunately even you had your CPU clocked at 5GHZ your computer wouldn’t boot much faster if at all. I’m sure you know that boot time is almost totally dependent on the HDD. Unless you could overclock your hard drive you won’t boot faster, SSD’s though will boot much faster. I have a 64gb SSD and I boot windows in under 20 seconds from power on to all my startup programs up and my system ready to go.
Alex.
oh on the msconfig thing if you enable it and chose 4 cores you will get the most out of you CPU.
oh on the msconfig thing if you enable it and chose 4 cores you will get the most out of you CPU.
Are you sure 1.4v seems a little high.
Are you sure 1.4v seems a little high.
Hey there Chanaman12345!
I’m running pretty much the same config as you, apart from the ram (same mobo and cpu). THE Q6600 PWNS! haha, i’m about to reboot and apply your settings to my ram and cpu, will upload a video in reply to this one in regard to how i get on? cheers!
Hey there Chanaman12345!
I’m running pretty much the same config as you, apart from the ram (same mobo and cpu). THE Q6600 PWNS! haha, i’m about to reboot and apply your settings to my ram and cpu, will upload a video in reply to this one in regard to how i get on? cheers!
It´s lame with the stock 1333Mhz fsb, everybody knwo that your aim will improve if you change it to 1337!
It´s lame with the stock 1333Mhz fsb, everybody knwo that your aim will improve if you change it to 1337!
Mostly a matter of opinion
Mostly a matter of opinion
I love my Core 2 Quad Q6600 runs amazing
I love my Core 2 Quad Q6600 runs amazing
phenom is better
phenom is better