Check out this site where it’ll show you a cool trick that actually TRIPLES your PC’s performance!
The Ultimate CPU Overclocking Guide!
T-MOBILE wrt54g-tm.blogspot.com wrt54g-tm with dd-wrt to overclock the router broadcom cpu. http linksys wrt54g-tm mod FREE INTERNET wrt54gl wireless router setup wifi DD-WRT autoap repeater bridge wrt54g xbox overclock repeater bridge wifi extender wrt54gtm power increase BY ROCKNTV1
Incoming search terms for the article:
- dd-wrt TX Power
- wrt160nl dd-wrt 19
- wrt54g mods
- ddwrt increase power
- ddwrt changing wlan power
- tx power dd-wrt
- wrt160nl cpu overclock
- dd-wrt overclocking
- wrt160nl dd-wrt tx power
- wrt54gl wifi heatsink
- linksys wrt54g2 increase power
- wrt160nl transmit power
- overclocking wrt54g dd-wrt
- Linksys WRTU54G-TM Output Power
- hardreset wrt160nl
- overclocking dlink routers
- Ralink overclock
- dd-wrt how to increase repeater power
- wrt54g-tm max transmit power
- wrt54gs dd-wrt bridge
@mastax1234 I wouldnt cry yet, as long as it works some times. The wrt54g has very small memory so a hard reset and cold reboot might striaghten the old girl out. Reset ALL TO DEFAULT NO SECURITY, and retest. I would allso pop the case off and give light dusting to ensure no dust bridged ic.
@ROCKNTV1 repeater bridge mode, but earlier i changed it to client bridge and it work now, i think my router is slowly dying, because ive owned my wrt54g for 5 years now
@mastax1234 hmm, ok are you in repeater bridge mode or client mode?
@ROCKNTV1 i checked on the site, i have the latest firmware available
@mastax1234 I belive their might be an upgrade for that by now, that should be a straight forward DD-WRT replacement firmware. mANY wireless router help files on the site in the description, you can try these first. sub / rate
@ROCKNTV1 im using DD-WRT v24-sp2 (10/10/09) micro
@mastax1234 sup.. thats not good, which version of the wrt54g are you running and firmware?
please help whenever i set my tx power even above 80 on wrt54g it wont reconnect with the neighbors router and my pc says a network error(i use a wireless bridge connection with permission)
@svenXDsven I dont know if that router is supported by dd-wrt or does overclocking with the added wifi output power increase like the wrt54g-tm with extra memory and signal boosting
@svenXDsven the power brick for the wrt54g-tm was 1.3 amps 12 v i think and the new ones are 1.5. You can take the top off the router and check for power at the header to eliminate the jack.
@ROCKNTV1 Yes, i had an another power brick with the same specs and it won’t work.
@svenXDsven have you tested the power brick?
mine is broken, it had a power shock :S (280v), it works for a few seconds but then it turns off.
@tqrules AGREED, but, the wrt54g-tm router with DD-WRT installed, and configured properly has 5 usable lan ports buit in that are much more efficient at routing then the system you describe as they are dedicated hardware, an to say the least of power consumption. Honestly as i say in the video for my purpose the overclocking feature is a bit of novelty, bit the ability to adjust and increase the output power of the wifi radio, far out weighs the system you describe.
@tqrules AGREED, but, the wrt54g-tm router with DD-WRT installed, and configured properly has 5 usable lan ports buit in that are much more efficient at routing then the system you describe as they are dedicated hardware, an to say the least of power consumption. Honestly as i say in the video for my purpose the overclocking feature is a bit of novelty, bit the ability to adjust and increase the output power of the wifi radio, far out weighs the system you describe.
i think overclocking a router is bull if you really wanna have a heavy duty router just buy a mini atx mobo with cpu and gpu onboard gett a old hard drive put your own router software on it that you like and plug in some ethernet / wifi cards in em and go with the flow
i think overclocking a router is bull if you really wanna have a heavy duty router just buy a mini atx mobo with cpu and gpu onboard gett a old hard drive put your own router software on it that you like and plug in some ethernet / wifi cards in em and go with the flow
@THEFIXERification yEAH times change, I currantly run the wrt54g-tm mildly overclocked without the heat sink in a repeater bridge config with a linksys wrt160nl with encryption on both ends ie: wireless ap and virtual inter face in the house to have both g and N standards available. The added output power of the radio in the wrt54g-tm is only nessary when long distance is required as the added power tends to add noise on the channels if its not necessary. And I have never need overclocking
@THEFIXERification yEAH times change, I currantly run the wrt54g-tm mildly overclocked without the heat sink in a repeater bridge config with a linksys wrt160nl with encryption on both ends ie: wireless ap and virtual inter face in the house to have both g and N standards available. The added output power of the radio in the wrt54g-tm is only nessary when long distance is required as the added power tends to add noise on the channels if its not necessary. And I have never need overclocking
@THEFIXERification Thanks for stopping in, Yeah man, those are good specs, but the WRT54G-TM that i am running here does all that plus the replaceable antennas.
(SUB ). wrt54g-tm dot blogspot dot com , plus with the broadcom cpu we can run AFTERBURNER instead of the standard Linksys speedbooster. If you wanted to put external high gain on CHECK OUT THIS SITE wrt54g-tm dot blogspot dot com
@THEFIXERification Thanks for stopping in, Yeah man, those are good specs, but the WRT54G-TM that i am running here does all that plus the replaceable antennas.
(SUB ). wrt54g-tm dot blogspot dot com , plus with the broadcom cpu we can run AFTERBURNER instead of the standard Linksys speedbooster. If you wanted to put external high gain on CHECK OUT THIS SITE wrt54g-tm dot blogspot dot com
I WILL BE GIVING AWAY SOME OF THESE ROUTERS SOON
COMENT / RATE & PLZ SUB CHECK SITE IN DESCRIPTION
I WILL BE GIVING AWAY SOME OF THESE ROUTERS SOON
COMENT / RATE & PLZ SUB CHECK SITE IN DESCRIPTION
@volpsp lol…. glad to here you got i it unbricked.. dont for get that the wrt54g-tm router has twice the memory as the wrt54gl . And the upgrade able antennas. THanks for stopping by..need help,,, check site in description,, thanks again for watching and taking the time to write… much apreciated ….plz rate / sub
john / ROCKNTV1
@volpsp lol…. glad to here you got i it unbricked.. dont for get that the wrt54g-tm router has twice the memory as the wrt54gl . And the upgrade able antennas. THanks for stopping by..need help,,, check site in description,, thanks again for watching and taking the time to write… much apreciated ….plz rate / sub
john / ROCKNTV1
mine is running at 250MHz factory stock v7 i just fix mine because i bricked it 2x but now it is running good
mine is running at 250MHz factory stock v7 i just fix mine because i bricked it 2x but now it is running good
@iwanthalo3 Thanks for stopping by… yes i ran a little d-link 604 for years, with several servers running,,,, one of the best feature is the ability to block IP RANGES to filter out those countries NO NAMES that run hack farms. Plz sub i have many more of these router mod videos coming. thanks again for watching.
@iwanthalo3 Thanks for stopping by… yes i ran a little d-link 604 for years, with several servers running,,,, one of the best feature is the ability to block IP RANGES to filter out those countries NO NAMES that run hack farms. Plz sub i have many more of these router mod videos coming. thanks again for watching.
very informative.
dd-wrt wont let me overclock my DIR-615, but it runs at 384 anyway lol
and its a ralink SoC. transmit power is at 130mw, 70 more than standard, but at least twice as good.
so far, DD-WRT is awesome. it has turned one of my most despised routers (had about 14, from various brands, d-link has been the only one to hold up until recently. a dir-635), into probably the best.
very informative.
dd-wrt wont let me overclock my DIR-615, but it runs at 384 anyway lol
and its a ralink SoC. transmit power is at 130mw, 70 more than standard, but at least twice as good.
so far, DD-WRT is awesome. it has turned one of my most despised routers (had about 14, from various brands, d-link has been the only one to hold up until recently. a dir-635), into probably the best.
@sikboy1029 thanks for stopping by .. glad to help… check description for my site that has ddwrt help and more wrt54g-tm videos
@sikboy1029 thanks for stopping by .. glad to help… check description for my site that has ddwrt help and more wrt54g-tm videos
Informative, thanks!
Informative, thanks!
@fuge805 admin admin is stock,,, but
on the webby interface , and root / admin on ssh
by the way you should prob not set the router to usew 192.168.2.1 as if you are repating this is the standard subnet for belkin and netgear wirless
// could con fuse the situation
@fuge805 admin admin is stock,,, but
on the webby interface , and root / admin on ssh
by the way you should prob not set the router to usew 192.168.2.1 as if you are repating this is the standard subnet for belkin and netgear wirless
// could con fuse the situation