How To Overclock Q6600

Posted on November 29, 2010 by

Check out this site where it’ll show you a cool trick that actually TRIPLES your PC’s performance!
The Ultimate CPU Overclocking Guide!

How To Overclock Q6600 to 3.2 GhZ

Related Blogs

  • Related Blogs on How To Overclock Q6600

Incoming search terms for the article:

37 Responses to How To Overclock Q6600

  1. scatmanwfm says:
    November 29, 2010 at 2:08 pm

    Nice video. I have a q6600 I also have the same mobo as you the x38 p5e and I had a few questions I was wondering if you could answer. I have my cpu at 3ghz I used to have it at 3.4 but when I would pop the case and put my hand on the northbridge it would be really hot and putting it to 3.0 under load it wouldn’t be nearly as hot to the touch. My question is should I put voltages on auto? Or is setting them manually better? Also why is it important to turn off everything in cpu config in bios?

  2. kakyaraznica says:
    November 29, 2010 at 3:16 pm

    can you help me to overclock my Q6600?
    i have that conf: C2Q Q6600 | Zalman CNPS 9700LED | ASUS Maximus Extreme | 2×1 GB OCZ3P16002GK | 2 x Sapphire HD 3870X2 (CrossFireX) | SilverStone Zeus ST85ZF 850 W

  3. mikey9890 says:
    November 29, 2010 at 4:24 pm

    @lenardius he doesn’t have fans, he uses water cooling..

  4. Lenardius says:
    November 29, 2010 at 5:32 pm

    CPU fan error on boot up please fix

  5. Marens777 says:
    November 29, 2010 at 6:40 pm

    but if my cpu overheats `?

  6. mitsesas says:
    November 29, 2010 at 7:48 pm

    very nice video !! and very very nice PC !!! cool mods you have there budy :D

    thank’s for the info’s …..!!

  7. h98889 says:
    November 29, 2010 at 8:56 pm

    When you finished overclocking, you did see the results by pressing the Tab key.
    Tab key displays POST screen.

  8. DetroitPC313 says:
    November 29, 2010 at 10:04 pm

    @paul41770 Your motherboard well work just fine. I would upgrade your hard drive to a SSD they make a huge difference( you well feel like your on a 3 thousand dollar computer it would be that fast) Also in the future i would upgrade your ram to 4 or 8gb.. You should not run windows 7 64bit on 2gb of ram; I would run 32bit it would run smoother.

  9. paul41770 says:
    November 29, 2010 at 11:12 pm

    hello, my name paul
    i built my first pc. i have the DG33FB motherboard (intel) Q6600 2.4GHz my ram is ddr2 2GB X 2
    my op. system (windows 7 ultimate) ( 64 bit ) im buying the GTX 260 from
    ebay. Q? is my motherboard any good? i wanna use my pc. to do high quality pictures / editing! whats your opinion on ( 1.) my motherboard/ (2 ). the videocard. (3) MY RAM?????
    basicly! what can i replace/ put together/ or add to make what i have ( GREAT)??? TY PAUL.

  10. Lostiano93 says:
    November 30, 2010 at 12:20 am

    @yosmer333 lol XD
    I Now have a Cooler Master Hyper 212 Plus! ;)

  11. yosmer333 says:
    November 30, 2010 at 1:28 am

    @Lostiano93 lol 85C @ full….. i hope you got the money for another processor because that Q6600 won’t lasts more than few months.

  12. PcGamerPaul says:
    November 30, 2010 at 2:36 am

    @Lostiano93 damn

  13. Lostiano93 says:
    November 30, 2010 at 3:44 am

    @PcGamerPaul 80, 85 C° FULL.

  14. PcGamerPaul says:
    November 30, 2010 at 4:52 am

    @Lostiano93 whats your temp?

  15. PcGamerPaul says:
    November 30, 2010 at 4:52 am

    @Lostiano93 whats your temp?

  16. Lostiano93 says:
    November 30, 2010 at 6:00 am

    @PcGamerPaul I have Q6600 3.2Ghz with stock fan ;)

  17. Lostiano93 says:
    November 30, 2010 at 6:00 am

    @PcGamerPaul I have Q6600 3.2Ghz with stock fan ;)

  18. aseskns says:
    November 30, 2010 at 7:08 am

    i have a P5G41-M LXmotherboard with up to date bios
    but when im opening the bios there is nowere any ai tweaker tabs : s

  19. aseskns says:
    November 30, 2010 at 7:08 am

    i have a P5G41-M LXmotherboard with up to date bios
    but when im opening the bios there is nowere any ai tweaker tabs : s

  20. DetroitPC313 says:
    November 30, 2010 at 8:16 am

    @PcGamerPaul Yes with no problem just try and keep the voltages as low as possible this way it does not get to hot. If your not going to mess around with the Voltages then just leave it on auto you well be fine 100%

  21. DetroitPC313 says:
    November 30, 2010 at 8:16 am

    @PcGamerPaul Yes with no problem just try and keep the voltages as low as possible this way it does not get to hot. If your not going to mess around with the Voltages then just leave it on auto you well be fine 100%

  22. PcGamerPaul says:
    November 30, 2010 at 9:24 am

    question: can i overclock it to 3.2 with stock fan? reply please

  23. PcGamerPaul says:
    November 30, 2010 at 9:24 am

    question: can i overclock it to 3.2 with stock fan? reply please

  24. davidkerr7 says:
    November 30, 2010 at 10:32 am

    wound increasing the volt case long term damage
    it should be kept as low as possible

  25. davidkerr7 says:
    November 30, 2010 at 10:32 am

    wound increasing the volt case long term damage
    it should be kept as low as possible

  26. ndragos87 says:
    November 30, 2010 at 11:40 am

    DetroitPC313 pls tell me what is you cpu VID

  27. ndragos87 says:
    November 30, 2010 at 11:40 am

    DetroitPC313 pls tell me what is you cpu VID

  28. ndragos87 says:
    November 30, 2010 at 12:48 pm

    @gamersforeverr yes you can,but if you buy a better gpu it will be ok with all the games,q6600 is a very good cpu

  29. ndragos87 says:
    November 30, 2010 at 12:48 pm

    @gamersforeverr yes you can,but if you buy a better gpu it will be ok with all the games,q6600 is a very good cpu

  30. DetroitPC313 says:
    November 30, 2010 at 1:56 pm

    @gamersforeverr I would not say all game but most yes. You Might want to sell your 9800GT and add a little cash and get yourself a GTX470 or even cheap get a ATI 5770 ether of those cards well let you play w.e you want.

  31. DetroitPC313 says:
    November 30, 2010 at 1:56 pm

    @gamersforeverr I would not say all game but most yes. You Might want to sell your 9800GT and add a little cash and get yourself a GTX470 or even cheap get a ATI 5770 ether of those cards well let you play w.e you want.

  32. gamersforeverr says:
    November 30, 2010 at 3:04 pm

    can i play the newest games on: PC Intel 2 Quad Q6600, 8 GB RAM, GeForce 9800 GT -1024 MB

  33. gamersforeverr says:
    November 30, 2010 at 3:04 pm

    can i play the newest games on: PC Intel 2 Quad Q6600, 8 GB RAM, GeForce 9800 GT -1024 MB

  34. Koenstuurwold0 says:
    November 30, 2010 at 4:12 pm

    @Eagle0watch freezing elektronics causes more damage then overheating. Just to let you know :o )

  35. Koenstuurwold0 says:
    November 30, 2010 at 4:12 pm

    @Eagle0watch freezing elektronics causes more damage then overheating. Just to let you know :o )

  36. Eagle0watch says:
    November 30, 2010 at 5:20 pm

    Hello guys, i just made a video of me overclocking my cpu using 2 floor freezers.I’ve never seen anybody try this before so i did it.If you don;t mind check it out its called"Overclocking I-7(920) using two Freezers!"

  37. Eagle0watch says:
    November 30, 2010 at 5:20 pm

    Hello guys, i just made a video of me overclocking my cpu using 2 floor freezers.I’ve never seen anybody try this before so i did it.If you don;t mind check it out its called"Overclocking I-7(920) using two Freezers!"

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>